TUF Gaming X570-Plus Wi-Fi M.2 Slots Guide 2026

The ASUS TUF Gaming X570-Plus (Wi-Fi) motherboard shines with robust M.2 slots for NVMe SSDs in 2026 builds. This guide details configurations, compatibility, and optimization.

Supporting PCIe 4.0, it handles high-speed storage effortlessly. Perfect for gamers and creators seeking speed without compromise.

M.2 Slot Specifications

Three M.2 slots: two PCIe 4.0 x4, one PCIe 3.0 x4. Max lengths 2242/2260/2280/22110.

  • Slot 1: CPU-direct PCIe 4.0
  • Slot 2: Shared with PCIe x16
  • Dissipators included

Installation Steps

  1. Power off and ground yourself.
  2. Remove pre-installed heatsink.
  3. Insert SSD at 30-degree angle, secure screw.
  4. Reapply thermal pad if needed.
  • Check BIOS for detection
  • Update firmware via Armoury Crate

RAID and Multi-Slot Setup

Configure RAID 0/1/10 for speed boosts. Slot 1+2 optimal for NVMe RAID.

  • BIOS > Advanced > AMD CBS
  • Max throughput 14GB/s combined

Troubleshooting Common Issues

Boot loops? Disable CSM in BIOS. Heat issues? Ensure pads contact.

  • Verify PCIe lane allocation
  • Test single drive first

Frequently Asked Questions

How many M.2 slots does it have?

Three slots: two PCIe 4.0 x4 and one PCIe 3.0 x4.

Does it support PCIe 5.0 SSDs?

Backward compatible, but runs at PCIe 4.0 speeds.

Can all slots run simultaneously?

Yes, with minor lane sharing on slot 2.

Recommended SSDs for 2026?

Samsung 990 Pro, WD Black SN850X for optimal performance.

Related Topics